NOW ACCEPTING · ALL ENGINEERING DISCIPLINES

Engineer the Open Source
Future.

Comfac Global Group (CGG) and Cornersteel have active IT, Engineering, and Architectural projects centered around sustainable, open-source technological advancement. We accept all engineering disciplines and deploy interns on real production projects — not mock exercises.

ONLINE APPLICATION: https://portal.comfac-it.com/apply

9+
Engineering Disciplines
10
Active Project Tracks
3
Locations
₱0
Licensing Cost — All Open Source

Ready to join? Start your application now — training runs in batches, so apply early to secure a slot.

Apply at portal.comfac-it.com/apply →
Open to All Engineers

We Accept All Engineering Disciplines

Every discipline has a home here. We match your background to active projects that need your skillset.

🏛️ Architecture
🏗️ Civil Engineering
⚙️ Mechanical Engineering
⚡ Electrical Engineering
📡 Electronics & Communications
🧪 Chemical Engineering
💧 Water Management & Sanitation
🖥️ Computer Engineering
🔌 Embedded Systems
🌱 Environmental Engineering
🔧 Industrial Engineering
📐 Drafting & Design Technology
🎯
Real Projects. Real Deliverables.
Intern deliverables are benchmarked against professional industry-standard outputs and must be submitted to both the company and your professors. This is not busywork — your output ships to production or becomes part of our open-source library.

Internship Projects & Scope

Ten active project tracks spanning engineering design, digital fabrication, industrial robotics, biotech, sustainable energy, and embedded systems.

⚙️ FreeCAD Migration

Replacing proprietary software (AutoCAD, SolidWorks, Revit) with FreeCAD's BIM, FEM, CFD, and 3D workflows. Includes Automated Bill of Quantities (BOQ) and custom workbench development using Python scripts driven by AI tooling.

🏙️ Procedural Design & Automation

Adopting "World Building" disciplines from Game Development to automate factory, warehouse, office, and residential layouts. Includes procedural generation of fire exits, traffic flow paths, workspace clusters, pipe/duct routing, lighting, and raised floors.

🧊 Digital Twins & Virtualization

3D virtualization of plants and facilities using Blender and Godot to simulate logistics and inventory. Build interactive digital replicas of real facilities to support operations, space planning, and client presentations.

🖥️ Data Center Design

Planning and infrastructure for high-availability technical environments. Covers rack layout, cable management, cooling topology, power redundancy, and compliance documentation for data center build-outs.

🌿 PhotoBio-reactor

Research and development in Algae Harvesting and Carbon Capture. Design, prototype, and iterate on photobioreactor systems for sustainable carbon sequestration and biomass production.

☀️ Industrial Systems

Industrial Microcontrollers, Solar Power integration, and HVAC systems. Work on embedded controls, sensor interfaces, energy monitoring dashboards, and solar ROI modeling for real installations.

🌾 Field Engineering & Sustainability

Practical field work with ESCO Solutions focusing on energy-efficient infrastructure. Site audits, energy audits, sustainability reporting, and implementation of green building standards. See escoincsolutions.com.

🏭 Fabrication & Machining

Hands-on technical training at the Manufacturing Plant (Cabuyao Location). CNC operation, precision measurement, fixture design, and production workflow documentation — bridging the gap between CAD design and physical manufacturing.

🤖 Industrial Robotics

Reviving orphaned Japanese industrial robot arms on our own open-source control, simulation, and AI stack — mechanical rebuild, servo drives, FPGA-based motion control, and a full digital twin. We are building robots, not importing them. See the full programme below.

🧬 BioTech — PBR, MMPP & Water Treatment

Photobioreactor carbon capture, micro-modular pyrolysis, and waste-water monitoring — three process-engineering tracks that turn environmental compliance into a sellable product, and that are designed to feed each other. See the full programme below.

Three Technical Pillars

Every intern is trained in at least one of these open-source technology pillars depending on their discipline.

Engineering Mandate · All Disciplines

FreeCAD &
Python Automation

All Engineering and Architecture interns are trained in FreeCAD. CGG is building the first dedicated FreeCAD Dev Team in the Philippines for procedural automation using Python scripts and AI model integration.

  • BIM, FEM, CFD, and 3D parametric workflows
  • Python scripting to automate CAD tasks
  • Connect CAD data to AI models
  • Automated Bill of Quantities (BOQ)
  • National initiative: replacing AutoCAD & SolidWorks
freecad.org ↗
Architecture Focus · Spatial Design

Blender &
Geometry Nodes

Architecture students undergo specialized Blender training focused on Procedural Building and Geometry Nodes — applying game-industry World Building techniques to real architectural design automation.

  • UX for Spaces — procedural rules for spatial design
  • World Building for factories, warehouses, offices
  • Automated workspace cluster topology
  • Geometry Node add-on reverse engineering
  • Deliverables: procedural tools that automate majority of manual workflow
Engineering Focus · Infrastructure

Procedural
Design Techniques

Engineering interns develop Procedural Design techniques for technical infrastructure. These designs borrow logic from game engine environment generation to make infrastructure paths adapt dynamically to architectural changes.

  • Pipe and duct routing automation
  • Lighting layout generation
  • Raised floor systems
  • Dynamic pathfinding for fire exits
  • Foundation for Comfac FreeCAD custom workbenches
🇵🇭
National Open-Source Engineering Initiative
CGG advocates for national FreeCAD adoption to save businesses millions in licensing costs and support sustainable Philippine technological advancement. Better Gov Project: Replacing AutoCAD and SolidWorks with FreeCAD — A National Open-Source Engineering Initiative.

Industrial Robotics

We are building industrial robots — reviving orphaned Japanese arms on an open-source control, simulation, and AI stack, then installing and supporting them as a recurring service rather than a one-time sale.

The Thesis

The machine
outlives its brain

An industrial arm's mechanical structure lasts twenty years. Its proprietary controller, software licence, and OEM support do not. When those expire the arm is orphaned — no controller, no software, no calibration data — and most are simply scrapped for their steel and copper.

  • Without its controller, an arm sells for 90–99% less
  • Orphaned arms fetch $140–$650; the same arm complete and warrantied, $16,000–$40,000
  • The tier nobody wants is the tier we buy
  • Success is a working arm CGG can reconfigure itself
Method

Simulate first, build second, then teach it

The whole virtual stack is proven before the hardware is touched. The arm is modelled and driven in simulation, the control loop is closed against simulated microcontrollers, and only then does the physical rebuild begin — the same virtualisation-first doctrine we run on every engineering project.

  • Digital twin of the arm and its workcell
  • Puppet and point-and-click control in the simulator
  • Simulated microcontrollers and I/O before real boards
  • Closed loop: simulation → ROS 2 → back to simulation
Stack

Open-source
robot brain

  • Digital twin & simulation: Godot Engine, with URDF / DH parameter export
  • Robot learning: Hugging Face LeRobot — datasets, policy training, sim-to-real
  • Real-time control: Xilinx Zynq-7020 FPGA/ARM SoC (Zybo Z7-20 reference)
  • Servo drives: STMBL industrial AC servo and/or ODrive
  • Electronics: KiCad → JLCPCB / PCBWay fabrication
  • Mechanical work: Cornersteel Systems Corporation
🔧 The Refurbishment Pipeline

1. Source — identify orphaned Japanese arms (arm-only, no controller) out of the factory-retirement market.
2. Reverse-engineer — characterise the mechanics, the encoders, and the failure modes of the original controller generation.
3. Rebuild the brain — replace the proprietary controller with our own motion controller and open-source servo drives.
4. Calibrate — recover the kinematic model, then validate it against the digital twin.
5. Teach & deploy — train a task policy in simulation, transfer it to the physical arm, and document it.

🧪 What Robotics Interns Actually Do

Mechanical / Manufacturing: teardown and inspection, fixture design, 3D-printed and machined parts, mechanical rebuild.
Electronics / ECE / Computer Engineering: servo-drive wiring, encoder and I/O integration, control-board bring-up, PCB work.
Computer / Software: Godot simulation, ROS 2 nodes and bridges, teleoperation, dataset capture and policy training.
Industrial Engineering: time-and-motion studies of the workcell, cycle-time modelling, and the payback analysis for each deployment.

🇵🇵
Why This Is Not a Bulk Import
Anyone can buy a new caged robot. The value here is the capability to re-control, reconfigure, and support a machine whose maker has walked away — a local industrial-robotics competence, a published open-source curriculum, and a talent pipeline built with our partner schools. Public project page: sites.comfac.net/comfac-robotics.

BioTech — Carbon, Materials & Water

Three process-engineering programmes that turn environmental compliance into a product: algae photobioreactor carbon capture, micro-modular pyrolysis, and waste-water monitoring. This is a new domain for Comfac, run as an open research programme with published methods.

🌿 Algae Photobioreactor (PBR)

A closed, stainless, multi-cubic-metre algae tank fed CO₂ and concentrated, UV-filtered sunlight. The biomass is not the end of the story — it is converted into a bio-based adhesive and binder for building materials, displacing the imported, formaldehyde-based resins used in particleboard, plywood and composite panels.

  • Density band: 1–5% algae-to-water (w/v)
  • Vessel: closed cylindrical, 316L-candidate stainless — washable, no dead corners, saltwater-resistant
  • CO₂ dosing: a closed loop — the sensor reads algae concentration, the controller meters CO₂ flow
  • Refill: saltwater make-up runs concurrently with extraction, not in sequential batches
  • Light: solar concentrators — the light-delivery problem shared with our solar and fiber-optics research
  • Accounting: sequestered carbon is measured and tracked through our ERPNext carbon-credit module
♻️ Micro-Modular Pyrolysis Plant (MMPP)

Skid- or container-mounted pyrolysis units — roughly 1–30 tonnes per day of plastic feedstock — that convert non-recyclable waste into pyrolysis oil, syngas and char under oxygen-deficient conditions, with no open flame. The oil and char are products; the syngas is not burned on site.

  • Design rule: pure pyrolysis, no on-site combustion — a fuel-product plant, not a waste-to-energy plant
  • Why it matters: RA 8749 §20 bans “incineration”, and non-burn oxygen-deficient pyrolysis is arguably outside that ban — DENR MC 2002-05 treats it as non-burn, and DAO 2000-81 Rule XXVIII supplies the definition of a “non-burn technology”. It is an inference from the instruments, not a ruling
  • Contested ground: DAO 2019-21 groups pyrolysis with incineration and gasification under one waste-to-energy track, so the permitting path stays an open question — and pyrolysis oil and char must be tested and classified before being treated as sellable fuel
  • Precedent: Green Planet Renewable Energy Corp (Naawan, Misamis Oriental), DOST-X/SETUP-funded, operating since January 2025 on tires and plastic
  • Vendor quality bar: “professional-grade” (roughly 800–1,200 °C, with emissions controls) — DENR-EMB Region 7 has publicly warned against backyard mini-pyrolysis
💧 Water Treatment & Monitoring

A programme separate from the algae work: an inventory of Comfac's own waste-water streams, and the sensors that monitor them. This is a plant-wide instrumentation problem with a data backend behind it.

  • Source inventory: which streams exist, what is currently measured, and where the gaps are
  • Sensor selection: parameters, ranges, calibration and maintenance requirements for industrial duty
  • Data backend: time-series storage and dashboards, with an automated alert loop
  • End use: compliance evidence for the EPR regime (RA 11898), and the Cabuyao site scenario
🔗
The Programmes Are Designed to Work Together
The pyrolysis plant is the candidate CO₂ source for the algae culture — its off-gas feeds the photobioreactor, the reactor produces the biomass, and the biomass becomes the binder in the composite panel. That loop is why the two briefs are researched as a pair rather than in isolation.
📐
Open Items Interns Will Actually Work On
Species selection (blocks light-dose, shear-tolerance and CO₂-uptake figures) · the design fork between pure pyrolysis and pyrolysis-plus-combined-heat-and-power · module sizing and bill of materials for a 200 L and a 2,000 L photobioreactor · waste-water source inventory and sensor selection · first primary-source archival before anything here is cited externally.
Intern Groups & Coordinators

Find Your Group

Each discipline group has a dedicated coordinator. Contact the relevant person to schedule your interview and confirm batch availability.

Technical Track
⚙️ FreeCAD, Blender & Geometry Nodes
Nicco Salonga
FreeCAD & Blender Expert
Electrical & Systems Track
⚡ Data Center, Electrical & Auxiliaries
PJ Paclibar
Electrical Engineer (EE)
Eunice Sanao
Electronics & Communications Engineer (ECE)
Mechanical & Systems Track
🔩 Data Center, General Engineering & Mechanical
Emerson Balondo
Mechanical Engineer (ME)
Sustainability Track
🌿 Field Engineering (ESCO & Sustainability)
Aaron Castillejo
Field Engineering Lead
Multi-Discipline Engineering
🧪 Engineering (Arch, Civil, ME, EE, Water, Chem)
Jan Vincent Libutan
Chemical Engineer (Chem)
John Karol Abayan
Electronics & Communications (ECE)
Iloilo Facility
🏭 Iloilo Facility Engineering
Bryle Jovero
Facility Engineer
Joko Perez
Facility Engineer
Architecture & Design Track
🏛️ Architecture & Cornersteel Fitout
Paul Gomez
TPDD Manager
Ernest Canonizado
Design Head
Civil & Structural Track
🏗️ Civil Works
Kevin Navato
Civil Engineering Head
Embedded Systems & IoT Track
📡 Com-Eng, ECE & Embedded Systems
RJ Mercado
Electronics & Communications (ECE)

Next Steps for Applicants

Three steps from application to first day. Training runs in batches — coordinate early to join the next available group.

1
Step 1 — Most Important
Submit Your Online Application

The primary application channel is the online portal. Fill it out completely before reaching out to coordinators.

→ Apply at portal.comfac-it.com/apply

2
Step 2
Schedule Your Interview

Call the relevant coordinator from your intern group above to check for available interview slots. Training is most efficient when conducted in batches, so applicants are encouraged to coordinate for upcoming batch schedules.

  • FreeCAD & Blender: Contact Nicco Salonga
  • Architecture & Civil: Contact Paul Gomez, Ernest Canonizado, or Kevin Navato
  • Electrical & Systems: Contact PJ Paclibar or Eunice Sanao
  • Mechanical: Contact Emerson Balondo
  • Iloilo: Contact Bryle Jovero or Joko Perez
  • ECE / Embedded: Contact RJ Mercado
3
Step 3
Prepare Your Documents

A signed Internship Agreement is required before your start date. Download the template from the portal after your application is accepted.

  • Signed Internship Agreement (template provided)
  • Endorsement letter from your school / OJT coordinator
  • Any school-specific OJT requirements
⚠️
Training Runs in Batches
Slots are not always open individually. Apply early and coordinate with your group's contact to join the next scheduled batch. Walk-in applications without a prior online submission will not be processed.
Reporting Locations

Where You'll Be Based

Four locations across Metro Manila, Iloilo, and Laguna. Your assignment is determined by your discipline and batch coordinator.

Location Reporting To Focus
Mandaluyong
CGG Tech Center
Edmund (Jun) Valen, Christopher Gacad, or RJ Mercado IT, Embedded Systems, ECE projects
Makati
World Centre Building
Engineering: PJ Paclibar, Emerson Balondo, Eunice Sanao, or Aaron Castillejo
Support: Avie Mindanao, M. Glorioso, or E. Requireme
Data Center, EE, ME, Sustainability
Iloilo Facility
Cornersteel Iloilo
Bryle Jovero or Joko Perez Iloilo facility engineering projects
Cabuyao, Laguna
Manufacturing Plant
John Karol Abayan Fabrication, Machining, Manufacturing

CC List for Email Submissions

When sending application documents by email, CC all recipients below:

Ready to build something that matters?

Submit Your Application — portal.comfac-it.com/apply →

All disciplines welcome. Training runs in batches. Apply early.

🔒
Data Privacy Notice for Applicants — Republic Act No. 10173

By submitting your application, curriculum vitae (CV), and personal details, you authorize Comfac Corporation, Cornersteel Systems Corporation, ESCO, and Comfac Technology Options (the "Group of Companies") to collect, use, and process your personal information to evaluate your suitability for the internship / OJT program, in accordance with the Data Privacy Act of 2012. With your consent, if not selected, we may retain your details for up to ten (10) years to consider you for future opportunities across the Group. To opt out of data retention, please indicate this in your application or contact our DPO.

DPO: [email protected]  |  +63 920 922 1092  |  18F World Centre Building, #330 Sen. Gil Puyat Avenue, Barangay Bel-Air, 1227 Makati City.  |  Full Privacy Notice (Annex D)